dCloud Help
Find the answers you need to get started using dCloud.
Recommended Endpoints: IP Phones, TelePresence Units, and Access Points
May 2023
Required: Cisco Meraki
Attention: Most legacy routers are on the Cisco End-of-Sale and End-of-Support list. Therefore, Cisco dCloud Support will be limited for legacy router models.
We recommend and support the following Meraki MX Endpoints, Cisco router models, and configurations tested and approved by the Cisco dCloud Team for use with dCloud content.
To set up your router for dCloud use, connect the router to the Internet and add it to dCloud. Meraki MX devices have zero touch configuration; however, legacy routers require configuration using customized configuration files that you download from dCloud.
Note: Legacy routers used with Cisco dCloud must support Cisco® Easy VPN to allow a dCloud session to connect to it automatically. At this time, routers running Cisco IOS XE do not support Easy VPN and cannot be used to connect endpoints to Cisco dCloud.
For Meraki MX appliances: Add the device for dCloud use only once for each Meraki MX. The Meraki MX configuration will be dynamically added and removed at session start and session end, respectively. The Meraki MX will connect automatically to any session to which you add it.
To learn more about how Meraki enhances Cisco solutions, see How Routers work with Cisco dCoud and Routers and Endpoints Recommended for dCloud Solutions.
Table 1. Supported Meraki MX Endpoints
Meraki References
Be sure to explore these topics and videos, training opportunities, and reference guides for more information:
- Troubleshoot Meraki MX Issues
- Upstream Firewall Rules for Meraki MX
- Cisco Meraki Developer Documentation
Contacts: For insight on requirements for dCloud, contact the dCloud Support team or the dCloud Technnical Lead for the solution's Architecture.
Legacy
This section is in progress/topic is under development. May 2023
IP Phones
TelePresence Units
| TelePresence Units | ||||
|---|---|---|---|---|
| Product | Description | Qty | List Price | Extended Price |
| CTS-EX90-K9 | EX90 - NPP, Touch UI | 1 | $12,870.00 | $12,870.00 |
| SW-S52001-TC4.X | Software 4.x Non-encrypted | 1 | $0.00 | $0.00 |
| PWR-CORD-XX-A | Pwr Cord 1.8m Black (XX - Choose power cord based on location) | 1 | $0.00 | $0.00 |
| $12,870.00 | ||||
| CTS-EX60-K9 | EX60 - NPP, Touch UI | 1 | $8,970.00 | $8,970.00 |
| SW-S52001-TC6.X | Software 6.x Non-encrypted | 1 | $0.00 | $0.00 |
| PWR-CORD-XX-A | Pwr Cord 1.8m Black (XX - Choose power cord based on location) | 1 | $0.00 | $0.00 |
| $8,970.00 | ||||
| CTS-SX20-PHD12X-K9 | SX20 Quick Set HD, NPP, 12xPHDCam, 1 mic, remote cntrl | 1 | $11,900.00 | $11,900.00 |
| PWR-CORD-XX-A | Pwr Cord 1.8m Black (XX - Choose power cord based on location) | 1 | $0.00 | $0.00 |
| SW-S52011-TC6 | SW Image Non-Encrypted SX Series | 1 | $0.00 | $0.00 |
| LIC-SX20-DD | Dual Display Option for SX201 | 1 | $2,200.00 | $2,200.00 |
| LIC-SX20-MS | MultiSite Option for SX20 | 1 | $3,300.00 | $3,300.00 |
| LIC-SX20-PR | Premium Resolution Option for SX20 | 1 | $3,300.00 | $3,300.00 |
| CAB-MIC20-EXT | Extension cable for the Performance microphone | 1 | $30.00 | $30.00 |
| CTS-QSC20-MIC | Performance Microphone 20 | 1 | $468.00 | $468.00 |
| CTS-CTRL-DVC8 | Touch 8 - Control Device | 1 | $2,587.00 | $2,587.00 |
| CTS-SX20-QS-WMK | Wall Mount Kit for SX20 | 1 | $499.00 | $499.00 |
| $24,284.00 | ||||
| CTI-5310-MCU-K9 | Cisco TelePresence MCU 5310 up to 20 ports | 1 | $24,000.00 | $24,000.00 |
| CON-NEDN-CTI5310M | SNTC ESS 8X5XNBD Telepresence MCU 5310 up to 20 ports | 1 | $2,400.00 | $2,400.00 |
| PWR-CORD-XX | Power Cord | 1 | $0.00 | $0.00 |
| LIC-AESMCU53-K9 | AES and HTTPS option for MCU 5300 Series | 1 | $0.00 | $0.00 |
| CTI-5300-CAB2MCU | Cisco TelePresence MCU 5300 Series Stacking Cable | 1 | $450.00 | $450.00 |
| CON-NEDN-CTI53CAB | SNTC ESS 8X5XNBD MCU 5300 Series Stacking Cable | 1 | $45.00 | $45.00 |
| LIC-5300-4PL | 1 Full HD / 2 HD / 4 SD ports on MCU 5300 Series | 5 | $12,000.00 | $60,000.00 |
| CON-NEDN-LIC5304P | SNTC ESS 8X5XNBD 1 Full HD/2 HD/4 SD ports on MCU5300 | 5 | $1,200.00 | $1,200.00 |
| LIC-5310-MCU-K9 | License Key For MCU 5310 Software Image | 1 | $0.00 | $0.00 |
| SW-5300-MCU-K9 | Software Image For MCU 5300 Series Latest Version | 1 | $0.00 | $0.00 |
| $92,895.00 | ||||
| CTI-5320-MCU-K9 | Cisco TelePresence MCU 5320 up to 40 SD ports | 1 | $44,000.00 | $44,000.00 |
| CON-NEDN-CTI5320M | SNTC ESS 8X5XNBD Telepresence MCU 5320 up to 40 SD ports | 1 | $4,400.00 | $4,400.00 |
| PWR-CORD-XX | Power Cord | 1 | $0.00 | $0.00 |
| LIC-AESMCU53-K9 | AES and HTTPS option for MCU 5300 Series | 1 | $0.00 | $0.00 |
| CTI-5300-CAB2MCU | Cisco TelePresence MCU 5300 Series Stacking Cable | 1 | $450.00 | $450.00 |
| CON-NEDN-CTI53CAB | SNTC ESS 8X5XNBD MCU 5300 Series Stacking Cable | 1 | $45.00 | $45.00 |
| LIC-5300-4PL | 1 Full HD / 2 HD / 4 SD ports on MCU 5300 Series | 10 | $12,000.00 | $120,000.00 |
| CON-NEDN-LIC5304P | SNTC ESS 8X5XNBD 1 Full HD/2 HD/4 SD ports on MCU5300 | 10 | $1,200.00 | $12,000.00 |
| LIC-5320-MCU-K9 | License Key For MCU 5320 Software Image | 1 | $0.00 | $0.00 |
| SW-5300-MCU-K9 | Software Image For MCU 5300 Series Latest Version | 1 | $0.00 | $0.00 |
| $180,895.00 | ||||
| CP-DX650-K9 | Cisco Desktop Collaboration Experience DX650 | 1 | $1,695.00 | $1,695.00 |
| CP-DX70-K9 | Cisco Desktop Collaboration Experience DX70 | 1 | $2,750.00 | $2,750.00 |
| CP-DX80-K9 | Cisco Desktop Collaboration Experience DX80 | 1 | $3,990.00 | $3,990.00 |
Access Points
X = Regulatory Domain XX = Power Standard **The OEAP 600 has limited functionality and is only utilized in the Teleworker demo guide.
Back to top
